Upgrading HP t510 Thin Client

This short how to explains possible upgrade options for the HP t510 Thin Client

CPU (soldered in, not able to upgrade):

• VIA Eden X2 U4200 @ 1.0+ Ghz
• Dual Core
• 64 bit
• CPU released in 2011

Graphic Card (soldered in, not able to upgrade):

•  VIA Chrome9 HC IGP (VIA VX900)

RAM:

• 204-pin 1600MHz DDR3 SODIMM
• minimum 128 MB reserved for onboard graphics
• A 2 or 4 GB single channel RAM Module is known to be working here
• 1 Memory slot

 Memory bus runs at 533MHz

HD 1:

• 44-pin IDE DOM (Disk On Module)
• 1, 2, 4, 8, 16 GB are known to be working here
  • 8 GB (e.g. Apacer 8C.4DD46.8256B as reported by email)
• 90 degree card

HD 2:

• There is an SATA Port on that device, which can be used to install an appropriate disk
• Known working devices Transcend TS32GHSD370 (32 GB)

Other:

• 6 USB 2.0 (two in front, two in rear, two in secure USB compartment)
• 10/100/1000 Gigabit (Broadcom 57780 LAN)
• Optional (installed in the Mini-PCIe 1x Slot): Mini PCI-E Internal Wireless LAN with external antenna  (Atheros a/b/g/n)

Needed driver (and known latest working version):

Anything to add? Leave a comment please!